Thursday, August 23, 2012

Carpet in the garden

 Insulate Your Compost Pile
When it’s cold outside, place a large scrap of carpet over your compost pile to keep heat and moisture in, which will speed decomposition.

Monday, May 28, 2012

Natural Slug Control


Nighttime Gardening

You can stalk slugs in the middle of the night with a flashlight and spray them with a mixture of water and ammonia (ratio of 1:1).

Beer: Not Just A Beverage

The fermentation found in beer attracts slugs. Many gardeners bury a jar filled with beer near their plants. The slugs crawl into the beer and drown.
Warning: The ground beetle, the slug's predator, might also fall into this trap.

Try These Barrier Methods

Iron Phosphate Bait

Scientists believe that iron phosphate, once consumed by the slug, prevents it from further feeding. Spread bait around the plants or use as a perimeter barrier.

Herbs, Vegetables and Plant Barriers

Companion plantings can also act as perimeter barriers.
  • Garlic
  • Mint
  • Ginger
  • Sage
  • Fennel
  • Endive
  • Sunflower
  • Chicory
  • Red cabbage
  • Red lettuce

No Cost Pest Control


Reduce Slug Population Up To 80 Percent

One of the best kept secrets for slug control is to time the watering of your garden when slugs are inactive - mornings. A drastic reduction in slug populations (up to 80 percent) has been documented when using this method. Since dampness attracts slugs, changing the watering time from evening to morning means your garden will be dry by sunset. Fewer slugs will be enticed to enter your garden for a midnight snack.

Hideout: Create a Trap

You can create a damp dark trap for the slugs to hide under during the day. There are several popular methods using readily available gardening tools and supplies.
Upturned Flower Pot
  • A favorite gardener's trick for capturing slugs is to turn a flower pot upside down and place a pebble underneath the one side of the rim. Make sure the ground is damp. Some gardeners place a piece of sliced fruit underneath to encourage slugs to gravitate underneath the pot. Check your trap in the mornings and dispose of the pests.
Old Board
  • This method is easier than the flower pot trap. In the late afternoon, water a section of the ground beside the plants being attacked by slugs. Next place a wide board over the watered section. Turn over the board in the morning and collect the slugs. You can use newspapers or leftover landscaping cloth if you prefer.

Out of the Kitchen

Many ordinary cooking supplies can be relegated for slug control.

Salt Solution

This is probably one of the first remedy recommended to you to kill slugs. Salt kills slugs through a dehydration process. There is a risk that the salt will leach into your soil and kill your plants. Substitute table salt with Epsom salt which won't harm your plants. You'll need to sprinkle the salt generously to create a barrier between the slugs and your garden bed.

Coffee Grounds

Old-time gardeners swear by this method. The key is to use caffeinated coffee because recent studies have shown that it's the caffeine that kills the slugs. Spread used coffee grounds around the affected plants. You may prefer to purchase a caffeine spray created specifically for slugs. The caffeine spray is said to have one-percent to two-percent higher caffeine content than the average cup of coffee and is more effective in killing slugs than coffee grounds.

Other Natural Elements

There are many things found in nature that can aid in repelling slugs.

Seaweed: Soil Amendment and Repellent

Fresh seaweed makes a great soil amendment and a natural slug repellent. The salt content in seaweed repels the slugs. Spread seaweed around your plants being careful to keep it away from the actual plant. You need a barrier about four to five inches thick encircling your plant. You can use the seaweed along the outer perimeter of your garden bed. As the seaweed dries, it turns into an excellent garden mulch.

Lava Rock or Diatomaceous Soil  It has  an abrasive surface. You can use lava rock to create a rock barrier between the slugs and your garden. Just be sure to keep vegetation off of your wall or the slugs will use it as a bridge into your garden.

Diatomaceous earth is a composite of fossilized microscopic hard-shelled algae called diatoms. The creatures' skeletal remains are very jagged and sharp to pest with soft bodies like the slug. When a slug crawls through diatomaceous soil, the powdery pumice-like earth robs the slug of lipids. The resulting dehydration kills the slug.

Friday, May 25, 2012

Plants that repel mosquitoes

cultivated plants that repel mosquitoes:

Peppermint (Mentha piperita)
Rosemary (Rosmarinus officinalis)
Marigolds (Tagetes spp.)
Lemon balm (Melissa officinalis)
Garlic (Allium sativum)
Clove (Syzygium aromaticum)
Eucalyptus (Eucalyptus spp.)
Tea tree (Melaleuca alternifolia)
Lavendar (Lavandula angustifolia )


Wild Plants That Repel Mosquitoes

Vanilla Leaf (Achlys triphylla) is a plant native to the northwest and Japan. Indigenous peoples were known to hang bundles of the dried plants in and around their dwellings to keep mosquitoes and flies away. The plant can be rubbed on the skin fresh or dried to deter mosquitoes. I think its interesting that it often grows in shady, moist areas - the very places where mosquitoes can be the thickest.
Sagebrush, Wormwood, and Mugwort (Artemisia spp.) are in the same genus (plant grouping). All of these species can be used as an aromatic smudge that is known to be a very effective mosquito repellent. The crushed leaves can also be applied directly to the skin. These species grow in the drier habitats of the west, including the plains, deserts, and mountainous regions.

Pineapple weed (Matricaria matricarioides) (pictured above) is a common weedy species that grows all over North America. It can be found growing in lawns, edges of roads, and other disturbed areas. The aromatic crushed plant can be applied to the skin to help repel mosquitoes.

Additional wild plants known to repel mosquitoes:
Nodding onion (Allium cernuum)
Wild bergamot (Mondarda fistulosa)
Snowbrush (Ceonothus velutinus)
Sweetfern (Comptonia peregrina)
Cedars (Thuja spp.)

Monday, January 23, 2012

After days of wind and rain the sun shined brightly. Yes it was a welcome sight by all...

Tuesday, September 6, 2011

Saturday, June 11, 2011

How to Make Chamomile Garden Spray - Great Article

How to Make Chamomile Garden Spray - wikiHow


This is a safe, organically sound garden spray that you can use in the garden without a worry. This spray has the same effects as pyrethrum and can be substituted anywhere that pyrethrum would be effective. It is also suitable for use to give sick plants a lift, or to water over damp seedlings to prevent "damping off".[1]
  1. 1

    Purchase or cut some chamomile. This recipe is suitable for either fresh flowers, or dried flowers. Choose whatever suits your needs best, depending on what is available. It is also possible to use a chamomile teabag to make the spray. To do this, take a teabag and pour boiling water over it, following the manufacturer's instructions. This is just the same as making a cup of tea (and is what the images show).[2]

    New Alienware Gaming PCs

    Check Out Alienware's New Elite Gaming Desktops w/ Intel® Core™!
    Dell-Computers.net
    • The amount of chamomile is dependent on how much you need for use in your garden. The ratio is about one part fresh chamomile flowers to three parts water and slightly less for dried flowers (which are more potent).
  2. 2

    Select the flowers. You may need to remove leaf matter and any foreign particles.

    • Or, simply unfold your teabag.
  3. 3

    Make chamomile tea of triple strength. Pour boiling water over the fresh or dried flowers/teabag. By way of indicating the size ratio, if you are making a large jug (pitcher) of chamomile garden spray, fill a cup with fresh flowers or fill quarter to half a cup of dried flowers and add to the jug. Fill the rest of the jug with the water.
  4. 4

    Allow to steep for a few hours, up to 24 hours is fine. Once it cools, it is ready to use. Strain the flowers (if using), and place the liquid into a spray bottle and label for use.
  5. 5

    Use this spray as an insecticide. Spray on plants that have insect infestations.
  6. 6

    Protect seedlings. Another use is to prevent mildew and damping off in young seedlings. Spray gently on seedlings and allow to dry in the sun.

Tuesday, June 7, 2011

June Gardening in My Area

The season is really off to a slow start both nature and my self seem to need a kick start (LOL)

Tuesday, May 31, 2011

Poor Baby

We had a early visitor to the yard the last couple of days. My daughter surprised me by exclaiming there's a raccoon Mom. I'm like sure they aren't out during the day. No she said look. There it was surround by all three of our cats too! Not sure what they were going to do? The raccoon ran off, but showed up again the next day. Poor thing has a injury to it's head ... Hope it will be OK it looks young.

Sunday, May 29, 2011

Pre-treating Seeds to Speed Germination

From Thrifty Fun
Pre-treating Seeds to Speed Germination:
Most vegetable and flower seeds will freely germinate when given water, the ideal temperature, and a loose, well-aerated growing medium. Other seeds, however, need special treatment before they can be coaxed into germinating. These "pre-treatments" may include such things exposure to cold, or a thorough washing from rain.

Why So Fussy?

The types of seeds that benefit most from pre-treatment are those of native plants. These seeds all share a characteristic called innate dormancy. To a gardener trying to germinate seeds this might seem like a bit of an inconvenience, but in the wild, possessing this characteristic is very advantageous to the survival of a species.
Just imagine what would happen if every seed in a given population of plants germinated at the same time and suddenly there was a killing frost. The end result would be disaster. These extra conditions are built-in safety mechanisms that ensure seeds wait out the winter (or in some cases the dry season) before they sprout. And since not all seeds will have their extra conditions met at the same time, germination rates are staggered and the overall risk to the species is reduced.
Native seeds don't necessarily need to be pre-treated to germinate. Pre-treating them just increases the odds of success and helps speed up the process.

Pre-Soaking

Some seeds germinate faster and more reliably (and evenly) if you soak them in warm water for several hours at least 24 hours before planting them. One reason for this may be that the seeds have chemicals in their seed coats that must be washed away before the seeds will germinate. This is a common characteristic of plants native to areas that experience extended dry spells.
Other seeds may benefit from soaking because their thick seeds coats are hard for water to penetrate. In the vegetable garden, seeds like beets, carrots, parsley, parsnips, and spinach can all benefit from soaking. Size has nothing to do with whether a seed should be pre-soaked or not. It's all about the seed coating.
Small seeds can be folded into a biodegradable coffee filter, moistened with water, and placed into a plastic bag. Allow them to dry again before planting (they will stick to the filter), then cut up the filter into small pieces and plant the seeds, filter and all, directly into the soil. Note: If your seed package doesn't direct you to pre-soak the seeds, don't bother.

Scarifying or Nicking

Another way to speed up the germination process for seeds with thick seed coats is called scarification or nicking. This treatment allows water to penetrate the seed coat and initiate the germination process.
For example, Morning Glories seeds can benefit from this process. To do this, gently rub the seeds back and forth a few times between two sheets of sandpaper. With larger seeds, you can also use a nail clippers or a small nail file to carefully chip away a small portion of the seed coat. Be careful not to grind the seeds into dust or cut completely through to the embryonic portion in the seed.

Breaking Dormancy Through Stratification

In colder climates, the seeds of some native plants must be stratified, or exposed to cold temperatures for a certain period before they will break dormancy and germinate. Examples include common bleeding heart and cardinal flower, and native trees and shrubs like birch, dogwood, and spruce. Stratification simulates the natural conditions these seeds would experience in frozen or cold, moist soil during the winter.

Dry Stratification

The process of exposing seeds to freezing temperatures without moisture to break dormancy is referred to as "dry stratification". Most prairie grasses and many prairie flowers require simple dry stratification. Seeds can be dry stratified by placing them in an airtight bag or container and putting them in the freezer for 30 to 90 days prior to sowing. Larger quantities of seed can be placed in animal-proof containers and stored over winter in an unheated shed or garage.

Moist Stratification

The process of exposing seeds to cold temperatures with moisture is called "moist stratification". This treatment is especially common for native perennial flowers and shrubs growing in climates with very cold, snowy winters.
In a controlled environment, you can mimic moist stratification by placing seeds in a plastic bag or re-sealable container with an equal volume of moist (not wet) sawdust or clean builder's sand. Place the bags in the refrigerator at 34 to 38 degrees F for at least 3 to 4 weeks (do NOT freeze them). Try to time your moist-stratification treatment so that your seeds come out of the refrigerator at the appropriate time for planting.

Friday, May 27, 2011

Yard art Pebble Ball

STYROFOAM™ Brand Foam:
Ball, 5'
Small, river-washed pebbles (available by the bag in craft stores)
Latex adhesive for ceramic tile
Sanded tile grout
Acrylic exterior satin varnish
Black fine line permanent marker
Ruler
Palette knife
Disposable bowl, small
Bucket of water
Household sponge
Soft, clean rag
Rubber gloves"
Pebbled Garden Ornament
Steps:
  1. Sort pebbles into dark and light piles.
  2. Use marker to draw spiral around foam ball, from top to bottom, or draw custom pattern.
  3. Use palette knife to spread 1/8"-thick layer of tile adhesive onto small area of ball, along marker line. Note: Rest ball in small bowl while working to prevent rolling.
  4. Firmly press one or two rows of black pebbles into adhesive along entire marker line, placing pebbles close together; add adhesive as needed. Repeat, filling remaining spaces with light-colored pebbles for contrast; let dry completely.
  5. Following manufacturer's instructions, mix grout. Put on rubber gloves. Use tip of damp sponge to rub grout into spaces between stones. As you work, remove excess grout from stones with clean side of sponge. Note: If using sanded grout, rinse tools in bucket, not sink; discard water outdoors.
  6. When ball is completely grouted, wipe away excess once more using damp sponge. Let ball dry slightly. Repeat sponging until stones are clean.
  7. When dry, rub ball with clean rag to remove grout residue and restore shine.
  8. If using outdoors, follow manufacturer's instructions to apply one or more coats of sealer to ball.
®™ Trademark of The Dow Chemical Company ("Dow") or an affiliated company of Dow.
For more project ideas, please see styrofoamstyle.com.

Succulent Gardening and Living Art Check it out...

So Succulent Gardens Love it

Check them out...
So Succulent Gardens
http://www.sosucculent.com/wreaths.htm